How Much Horsepower Does Cold Air Intake Add? Full Guide

For a variety of reasons, a cold air intake is a popular modification for somebody who is just getting started with car improvements. This composition will go over how exactly the cold air inlet performs, its advantages, and whether the power boost would reach the level of expectations.

How Much Horsepower Does The Cold Air Intake Add?

According to some terms of cold-air intake or cold air inlet, it is a system that is intended so that the engine bay moves the air filter away in order to minimize the temperature of the heat entering the machine.

The combustion compartment is completely enclosed on all sides because internal combustion produces a lot of warm air inside. The air can become extremely hot. However, because the cool air is compact, it contains a lot more air; as much oxygen implies extra powerful combustion. Establishing a cold air inlet would fulfill this.

A modified air intake system on a modern engine.

It is not as simple as you might think to increase engine power. Although the main improvement is on the merchant or supercharger, it increases the additional performance of each component. As a result, it requires you to consider the offset and, finally, basic power, such as the same aspiration.

The majority of the auxiliary minibus is significantly improving airflow, so the large engine is in cold consumption, and because of the benefits of carburetor air, there are some vehicles that benefit the most from modifications just like trucks and SUVs vehicles.

Benefits of Cold Air Inlet

You might be wondering what are the benefits of improving your intake. Well, there are various benefits to this. One would be advantage of cold air consumption will be a turbo sound which provides the best sound of engine.

However, if you install intake consumption of cold air, the whistle turbo can be exceeded when you set the gas pedal. Some owners of SUVs and trucks have indicated that there is a better chance of gas mileage because it enables or enhances airflow cold intake system air- and thus the air-fuel combination.

Disadvantages of Cold Air Inlet

There may be a possibility of always wrong when installing some of the secondary markets in the car. However, because it is a cold air intake, the MAF sensor is collected correctly, and stop all parts correctly so that it does not cause problems with the car.

When this engine check signal is popped, it means that there is a problem with the intake manifold, but it cannot be applied to everyone but can be skipped or ignored when the car is performing well.

Dirty off-road driving.

In addition, when traveling in bad weather conditions, you might wanna be careful because the properly installed intake filter position is very low in the car and it is where it can absorb water if driven through the mud on a rainy day. When driving your modified vehicles you might want to consider the weather condition because this might become a hassle to you.

Steps in Installing Cold Air Inlet

First, if you are installing cold air consumption, get the model-specific site because the engine is ideally designed to put the engine in a narrow space. Feel free to analyze the given guide or the attached instruction. You can see if you will have the necessary tools and key steps as well as knowledge of the correct steps.

Step-By-Step Guide

1.    Remove the air filter box’s cover and the filter.

Car engine air filter.

2.    Detach the MAF sensor’s power cable.

3.    Start by removing the clip and you might want to grab some pliers for this method. Keep the air filter hose attached to the rest of the intake.

4.    Remove the filter housing by unscrewing it.

5.    You should separate the MAF sensor from the filter housing and mark the direction it should be facing.

Mass air flow (MAF) under the open hood of a car.

6.    Put the air intake tubing into the engine compartment and see how it fits. Examine the guidelines in order to determine which parts of the old intake you should be taking off.

7.    Install the new pipe and the MAF sensor so that it faces the right way.

8.    For the MAF sensor, you attached the power plug.

9.    Lastly, To complete the setup, you set up the air filter.


To sum up, everything that was stated so far, cold air intake is one of the few modifications that works well on its own, which is why it’s so popular with people who are just starting to modify their cars. (Also important are the low cost and ease of installation, as well as the cool sound that want to be street racers to crave.)

It makes no sense to spend thousands of dollars or more on a turbocharger or supercharger if the engine’s airflow is restricted by the factory.  Only after installing more high-performance parts and reducing the vehicle’s weight will you notice a significant increase in power.

Nonetheless, the upgrading is very useful especially for engines installed in trucks or SUVs, as well as sporty turbocharged cars where it unleashes the turbo’s sound.

Avatar photo
About Brock Rangel

Hi, I am Brock, and I am the lead editor/photographer for TheCarColony. I have been a mechanic for over 14 years now, and I am here to spread my car knowledge across the web!

Leave a Comment